How To Use: Vaporesso XROS 4 Kit

1. Getting to Know the Oxva Xlim SQ Pro Kit:

The XROS 4 is a small pod-system device which offers a MTL vaping experience. The replacement pods hold 2ml of e-liquid which sit on top of the battery which has a capacity of 1000mAh with 3 power output settings.

Contents

Begin by unboxing your Vaporesso Xros 4 Kit and familiarising yourself with its contents. The box will include:

• XROS 4 Battery x1
• XROS 0.4ohm Pod x1
• XROS 0.8ohm Pod x1
• USB-C Cable x1
• User Manual
• Warranty Card

2. Setting Up The Vaporesso Xros 4 Kit:

– Charge the Device: Before using the Xros 4, make sure to fully charge the device using the provided USB-C cable. The device will indicate the battery level with the LED lights. Charging should take no longer than 30 minutes.

– Filling the Pod: Remove the pod from the mod and locate the fill port by removing the black mouth-piece. Ensure that you do not overfill it to prevent leakage. Replace the silicone plug securely.

– Once filled, leave it to stand for 3-5 minutes. This will allow time for the cotton inside the coil to absorb enough e-liquid and prevent burning. This is very important. Once done, place the pod into the device and the magnets will hold it in place.

3. Using the Xros 4 Kit:

– Power On/Off: Press the fire button five times rapidly to turn on the device. To power off, repeat the same process.

– Adjusting Wattage: With the device turned on, press the button 3 times. This will get you into the settings interface. From there, just press the button to cycle between the 3 output settings.

– Vaping: Once the device is powered on and the wattage is set, press and hold the fire button to activate the heating element. Inhale from the mouthpiece and enjoy your vape. Remember to take breaks between puffs to avoid overheating the coil.

4. Maintenance and Safety:

– Cleaning: Regularly clean the pod, coil, and mod to ensure optimal performance. Use a dry cloth or cotton swab to wipe away any e-liquid residue.

– Coil Replacement: Depending on your usage, coils will eventually wear out. Replace the pod when you notice a decline in flavour or vapour production or if you are experiencing a burning taste.

– Battery Safety: Always use the provided USB-C cable to charge the device. Avoid overcharging or leaving the device unattended while charging. Do not expose the device to extreme temperatures or water.

The Vaporesso Xros 4 Kit offers a convenient and enjoyable vaping experience. By following the steps outlined in this guide, you can maximise the potential of this device and enjoy a satisfying vape. Remember to prioritise safety and maintenance to ensure long-lasting performance. Happy vaping!

Quick Links:

• Vaporesso Xros 4 Kit
• Vaporesso Xros Replacement Pods
• Bar Saltz 10ml
• Steam Saltz 10ml